Furniture care begins with following the instructions supplied with your individual product. Materials, finishes and assembly requirements vary, so product-specific guidance should always take priority over the general recommendations below. If anything is unclear, contact us before assembly or cleaning.

Before Assembly

Check that all packages and components have arrived before you begin. Open packaging carefully and avoid using sharp tools close to upholstery, timber surfaces, cables or finished edges.

Compare the parts with any instructions supplied and inspect the product for visible transit damage. Keep the packaging until you have confirmed that the product is complete and in good condition.

Choose a clean, level working area with enough space to protect both the product and your floor.

Assembly Guidance

Follow the supplied instructions in order and use only the fittings provided for the product. Do not force parts into position or fully tighten every fitting until the main structure is correctly aligned.

Large or heavy furniture may require more than one person to move or assemble safely. Never drag furniture across the floor. Lift it carefully and use suitable floor protection where needed.

After assembly, check that all components are secure and that the product stands evenly. Recheck accessible fittings periodically during normal use.

General Furniture Care

Keep furniture away from excessive heat, prolonged moisture and unnecessary direct sunlight where practical. Use coasters, placemats and protective pads to reduce the risk of marks from hot, wet or abrasive objects.

Remove dust with a clean, soft cloth. Attend to spills promptly by blotting rather than rubbing. Before using any cleaning product, test it on a small, inconspicuous area and follow the cleaner manufacturer’s instructions.

Avoid abrasive tools, harsh chemicals, bleach and solvent-based cleaners unless the product-specific instructions expressly permit them.

Upholstery

Vacuum upholstered surfaces gently using a suitable soft attachment. Rotate and reshape removable cushions periodically where the product design allows.

Blot spills promptly with a clean, absorbent cloth. Do not scrub the fabric or saturate the filling. For persistent stains or specialist fabrics, use a professional upholstery cleaning service.

Natural shading, pile direction and minor variations in texture may become visible under different lighting conditions.

Wood and Wood-Finish Surfaces

Dust with a soft, dry or slightly damp cloth, then wipe the surface dry. Clean spills promptly and avoid leaving wet items directly on the surface.

Use protective pads beneath decorative objects and avoid dragging items across the finish. Natural grain, colour and tone may vary between individual pieces.

Glass, Stone and Similar Hard Surfaces

Use a soft, non-abrasive cloth and a cleaner suitable for the specific surface. Avoid sudden impact, abrasive pads and dragging hard objects across the top.

Use coasters and placemats, and clean spills promptly. Product-specific care guidance should take priority where a particular finish requires specialist treatment.

Metal Components

Dust metal parts with a soft cloth and remove moisture promptly. Avoid abrasive cleaners and tools that may scratch or alter the finish.

Check accessible fixings periodically and tighten them carefully when required.

Outdoor Furniture

Follow the care instructions supplied with the individual outdoor product. When practical, keep furniture clean and dry and use suitable protection during prolonged periods of non-use or severe weather.

Store removable cushions in a clean, dry and ventilated location when they are not being used. Do not store damp cushions in enclosed spaces.

Need Help?

If you need product-specific assembly or care information, contact us at support@lomeraliving.com. Please include your order number, product name and clear photographs where relevant so we can assist you efficiently.